Russell Hobbs RHFZ1, Инструкция по эксплуатации

Страница: 7 / 24

- 5 -
For Customer Services, Spare Parts & Warranty Information please call 0845 683 8717
Installing and operating your freezer
• Before making the connection to the power supply, ensure that the voltage on the
nameplate corresponds to the voltage of electrical system at your home.
• Operating voltage for your freezer is 220-240 V at 50Hz.
• Before starting to use your freezer, please call the nearest authorized service and get
help on the installation, operation and usage of your freezer.
• The mains cord of your freezer has a grounded plug. This plug should be used with
a grounded receptacle that has a 16 amper fuse minimum. If you don’t have a
receptacle confirming with this, please have it done by a qualified electirician.
• We do not take the responsibility of the damages that occur due
to ungrounded usage.
• Place your freezer in a place that it would not be exposed to
direct sunlight.
• Your appliance should be at least 50 cm away from stoves, ovens
and heater cores, and should be at least 5 cm away from
electrical ovens.
• It should never be used outdoors or left in the rain.
• Fit the plastic wall spacers to the condenser at the back of the
freezer in order to prevent cleaning of the wall and for good
performance.
• When your freezer is placed next to a deep freezer, there should
be at least 2 cm between them to prevent humidity on the outer
surface. Do not place anything on your freezer, and install your
freezer in a suitable place so that at least 15 cm is available on
the upper side.
• If you will place your freezer next to your kitchen cabinets, leave
a space of 2 cm between them.
• Install the distance adjustment plastic (the part with black vanes
at the rear) by turning it 90° to prevent the condenser from
touching the wall.
• The adjustable front legs should be stabilized at an appropriate height to allow your
freezer operate in a stable and proper way. You can adjust the legs by turning them
clockwise (or in the opposite direction). This should be done before placing food in
the freezer.
• Before using your freezer, wipe all parts with warm water added with a tea spoonful
of sodium bicarbonate, and then rinse with clean water and dry. Place all parts after
cleaning.
• Do not put very (!) hot food or bowl on the top table. It can damage the toptable.
• Fit the plastic wall spacers to the condanser at the back of the refrigerator in order to
prevent leaning to the wall for good performance.
PDF created with pdfFactory Pro trial version www.pdffactory.com