5
1. Thermostat knob:
Turn the thermostat knob to select your desired temperature.
。
When the temperature reaches the selected comfort level, the heater will switch off.
。
When the room temperature drops below your selected comfort level, the heater will
start operating again.
2. Power shift knob
(model knob).
Turn this knob from middle-
“OFF” rightwards to select low (1000W) or high (2000W), and
the appliance will work.
Turn this knob from the middle leftwards to select low (1000W) or high (2000W) and the
appliance will work, and at same time it will oscillate.
3. The heater must be placed flat on the floor or the tip-over switch will shut it off
automatically.
This heater is equipped with an internal thermal protector, which causes the unit to stop
operating in the event the internal temperature exceeds normal operating temperatures.
If the unit shuts down:
1) Unplug the unit and wait 10 minutes
2) Plug in and turn the unit on again
CLEANING AND MAINTENANCE
The fan heater is for household use only and is not user-serviceable.
Do not open or change any parts by yourself. Please refer to a qualified electrical
service department or return to the supplier if servicing is necessary.
Always remember to unplug the unit from the electrical outlet when not in use
and before cleaning. Ensure that the speed control is set to “0”.
The body of the fan heater and the stand should be cleaned with a damp cloth.
Do not let water enter the appliance or the stand.
Do not use bleach or other abrasive substance or solvents to clean your fan
heater as it can be damaging to the finish.
Do not immerse the mixer in water or any other liquid, or hold it under a running
tap to clean.
