6
14.
The crevice tool can be used with or without the extender tube and can
be used on upholstery, in awkward spaces and nooks to remove pet hair,
lint and dust from blinds, curtains and upholstery;
a.
The small brush is part of the crevice tool. To store it, turn it back, parallel
to the crevice tool.
Tubes
15.
Fit the extendable tube to the nozzle for floors, carpets or hard to reach places.
a.
Push the tube release in the direction of the arrows on the release button
and keep it pressed
b.
Pull out as much of the inner tube as you need and then release the button;
it is best to retract the tube for storage.
16.
Push the wide end of the extendable tube on to the nozzle.
17.
Choose a tool and push it onto the narrow end of the tube.
Suction control
18.
The main suction control is above the wheels.
19.
Move it towards the cable rewind button to increase suction; move it towards
the on/off button to decrease suction.
20.
There’s also a suction control on the nozzle – move it towards the nozzle end
for maximum suction or move it away from the nozzle end to reduce suction.
Plug in
Caution: If you’ve accidentally pressed the power on/off button, the vacuum
cleaner will come on when you plug it in.
21.
Plug the cable into a power socket near the area to be cleaned (switch the
power socket on, if it’s switchable).
Switching on
22.
Press and release the power on/off button to turn the cleaner on.
Cleaning
23.
Move the tool over the surface cleaning a small area at a time.
24.
When you move to a new area, overlap the previous area to make sure none
of the surface is missed.
Switching off
25.
If you want to change tools or if you’ve finished vacuuming, press and release
the power on/off button to turn the cleaner off.
