Preparation & Installation
Ensure that there are no electric wires, gas or water pipes in the area where
holes are to be made.
Components of the appliance may have sharp edges. Wear protective gloves.
1. Ensure that there will be an electrical power point within adequate
distance of the oven after it has been installed.
2. Ensure the aperture measures (H)590 x (W)560 x (D)550mm, in accordance
with the positioning instructions detailed on the previous page.
3. Carefully and gently put the oven into the aperture recess, making sure
that the power cable can still be accessed.
4. Connect the oven to the electrical power point before pushing the oven
into the aperture fully.
5. Once this is done, open the oven door and secure the oven to the kitchen
cabinet with 2 distance holding screws, which fit the holes in the oven
frame on either side (near the top):
8
INSTALLATION