Installation
8
For Customer Services & Spare Parts please call
0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit us at
www.productcareuk.com
The distance between the rear edge of the hob and any adjacent wall is dependent on the
wall surface.
The cooker must not be placed next to or near a refrigerator.
Easily combustible material like curtains, paper, clothes, etc. should not be located near the
hob.
Kitchen cabinets/units or other furniture that is close/near to the cooker must be heat
resistant to more than 50°ͨC.
The appliance must be installed direct on the floor and not on a base.
Installation of the appliance
•
The earth cable must connected to the terminal.
•
You must ensure the insulated cable is connected to the power source during the
connection of the cable. If there isn’t an appropriate earthed electrical outlet, (in
accordance with the regulations of where the appliance is being installed), immediately
contact a qualified professional.
•
The earthed electrical outlet must be close to the appliance, (an extension cannot be
used).
•
The power cable must not touch any hot surface of the product. It must not touch the
back part of the appliance or it could be damaged, this may cause the product to short
circuit and stop working.
•
If the power cable is damaged, do not use the appliance and contact an authorised
service personal, qualified electrician or Product Care, (
0845 208 8750),
immediately.
•
The wrong electric connection may damage your appliance and such damage is not
cover by the manufacturer and will void the guarantee.
•
The appliance is rated as 230-240 volts.
•
The manufacturer bears no responsibility or liability for damages or losses caused from
incorrect installation of the appliance.
•
The appliance has been produced for a fixed connection to the power supply.
•
For a fixed connection use H05VV, H05V2V2 or H05RR type supply cord.
•
For a fixed connection use 3x2,5mm2 or 3x4mm2 sized cable according to appliance
power and terminal box label.
