8
this button will switch on, and the machine will stop working. What you need
to do is pouring out the ice, if the position of ice is lower than the position of
full ice sensor the machine will restart automatically.
OPERATING INSTRUCTIONS
1. Open the cover, and add water to reservoir,
2.
The water poured into water reservoir should be lower than the water reservoir’s
MAX position. When water volume goes beyond the max, please open the
bottom water drain plug to drain the excess water out.
3. Connect the machine to your main power socket, press the
, and then the
machine enters standby mode.
4. Select the desired ice size, the default size of machine is large ice cubes.
5. Press
key to start work.
PLEASE NOTE: The machine should be upright to place on the horizontal plane.
To ensure the machine ventilate normally, it is important to set 150mm room on
top, sides and back. Do not place the machine next to the roast oven, radiate or
other heat objects.
6. Select the small ice cube size when ambient temperature is below 15°c. and
when the ambient temperature is higher than 30°C, Large ice cube sizes are
recommended.
7. When the ice basket is full please remove the ice immediately, do not allow the
ice basket to overflow
