7
-
Press the “Fan Speed” button to select wind speed.
3. Dehumidifying operation
-
Press the “Mode” button until the “Dehumidify Indicator Lamp” blinks
-
Set the selected temperature to current room temperature minus 2
℃
. (16
℃
-31
℃
)
-
Set the fan motor to LOW wind speed.
4. Timer operation
-
Timer ON setting:
1. When the air-
conditioner is OFF, press the “Timer” button and select a desired ON time through
the temperature and time setting buttons.
2.
“Preset ON Time” is displayed on the operation panel.
3. ON time can be regulated at any time in 0-24 hours.
-
Timer OFF setting
1. When the air-conditioner is on
press “Timer” button and select a desired OFF time through the
temperature and time setting buttons.
2.
“Preset OFF Time” is displayed on the operation panel.
3. OFF time can be regulated for 0-24 hours.
5. Water Drainage
-
When the water level of the internal water tank reaches a predetermined level the WF light will
turn on on the control panel. This indicates that the water tank must be emptied. To do so
remove the black cap and then the white stopper and tilt the unit backward so that the water
can drain from the unit. Ensure this is done in an area where the water can be drained.
Installation Explanations
1.
Installation Explanations:
-
The portable air-conditioner must be installed on a flat level surface with no obstructions or
objects surrounding it. Don’t block the air outlet, and ensure any objects around it are at least
30cm away from the unit. (See Fig.8)
-
The unit should not be installed in dry cleaner or any areas where high humidity occurs.
-
The socket wiring should be in accordance with the local electric safety requirements.