For Customer Services & Spare Parts please call
0345 208 8750
Opening times: Monday - Friday 8am – 8pm & Saturday 9am – 1pm
or visit us at
18
Trouble shooting
If the clothes are not dry after normal drying time:
•
If you are drying laundry that weighs less than 1kg (small loads) when
wet. Then the 1hr programme must be used.
•
Check that you used the correct dryness level.
•
Check that the lint/fluff filter has been cleaned. A blocked filter will
restrict the airflow.
•
Check that your dryer is heating - below the door to the left side, should
feel warm to the touch after the first 10-15 minutes of its programme.
Failure to heat may indicate the safety cut-out has operated. To reset,
simply press the reset button at the rear of the machine. If it has operated
then a sharp “click” will be heard.
This cut-out only operates if the airflow is severely restricted so make sure
the filter is clean, the air inlets and outlets at the front and back are not
blocked, and that all other restrictions are removed before re-starting. If the
cut-out continues to operate after checking the above points, you should
contact Product Care on 0345 208 8750.
If your machine does not work check the following before calling a service
engineer:
•
Check that the machine has the correct weight load in the drum before
starting the appliance.
Reset button
