11
g. Now turn the steam dial towards the back. Note: There may be noise while the pump is in
operation - it is normal)
h. The button indicator light will flash while the coffee maker is preheating. It takes
approximately 2 (two) minutes to preheat. Once the machine has finished preheating, the
indicator light will stop flashing and all indicator lights should turn a solid colour.
i. Press the SINGLE ESPRESSO button to start rinsing water through the internals of the
machine and into the coffee cup.
j. Your appliance is now ready for use.
IMPORTANTANCE OF PRIMING THE COFFEE MAKER
To make a cup of good hot coffee, we recommend that you pre-heat/ prime the appliance before making
coffee, including the cup, so that the coffee flavour is not influenced by the cold parts of the coffee maker
or a cold cup.
FILLING WITH COFFEE
1. Place the selected crema filter into the porta handle of the porta-filter.
2. Fill the crema filter with fresh, fine ground espresso coffee (do not overfill).
3. Tamp and firmly compress the ground coffee with the flat side of the tamp tool so that it is
compressed and appears flat/ even inside the crema filter.
4. Clean any excess coffee from the rim to ensure that the porta-filter will fit properly when attached
to the brew head.
