FAULT
POSSIBLE CAUSE
REMOVING
METHODS
Unsatisfactory
washing result.
Water being hard.
Adjust the amount of
detergent based on
the instructions of the
detergent
manufacturer.
Laundry distributed in
your machine
unevenly.
Spread your laundries
in the machine
properly and evenly.
As soon as the
machine is loaded
with water, water
discharges.
The end of water
discharging hose is
too low for the
machine.
Set the water
discharging hose on
appropriate height.
(**)
No water appears in
the drum during
washing.
No fault. Water in the
non-visible part of the
drum.
-
Laundry has
detergent residues on
it.
Non-dissolving
particles of some
detergents may
adhere to your
laundries as white
spots.
Perform an extra
rinsing by setting your
machine to “Rinsing”
programme, or clean
the spots using a
brush after your
laundry dries.
Grey spots appear on
the laundry.
The reason for this
spots may be oil,
cream or ointment.
Use the maximum
amount of detergent
instructed by the
detergent
manufacturer in the
next washing
operation.
(**) See the chapter regarding installation of your machine.
45
SECTION 10: TROUBLESHOOTING
