- 6 -
TEMPERATURE
Thermostat Setting
• Thermostat automatically reg ulates the inside temperature of the refrigerator
compartment and freezer compartment.By rotating the knob from position 1 to 5,
colder temperatures can be obtained.
• « 0 » position shows thermostat is closed and no cooling is available.
• For short-term storage of food in the freezer compartment, you can set the knob
between minimum and medium position (1-3)
• For long-term storage of food in the freezer compartment, you can set knop medium
position.(3-4)
Note that; the ambiant temperature, the temperature of the freshly stored food and
how often the door is opened, affects the temperature in the refrigerator compartment.
If required, change the temperature setting.
• When you first switch on the appliance, for starting a suitable cooling, the appliance
should work 24 hours continuously until it cools down to sufficient temperature.
• In this time do not open the door so often and place a lot of food inside the appliance.
• If the unit is switched off or unplugged, you must allow at least 5 minutes before
restarting or re-plugged the unit in order not to damage the compressor.
•
Larders (coolers) have not any freezer compartment but can cool up to 4-6°C.
If your fridge is not cooling enough;
Your fridge is designed to operate in the ambient temperature intervals stated in the
standards, according to the climate class stated in the information label. W e do not
recommend operating your fridge out of stated temperatures value limits in terms of cooling
effectiveness.
Climate Class
Ambient Temperature (°C)
T
Between 16 and 43 (°C)
ST
Between 16 and 38 (°C)
N
Between 16 and 32 (°C)
SN
Between 10 and 32 (°C)
PDF created with pdfFactory Pro trial version
www.pdffactory.com
