4
5
self
clean
temperature
control
burst of
steam button
cool spray
mist button
water tank
BEFORE USING FOR THE FIRST TIME
• Fill the water tank with clean water, and then empty the water to ensure the tank is clean of
any manufacturing residues. Refill the tank.
• The iron may give off an odour and small amount of vapour when switched on for the first
time. This is normal and will stop as the element cures.
• Press the
burst of steam button 3 or 4 times, to prime and flush clean water through the
burst of steam pump.
• Press the
cool spray mist button 3 or 4 times, to prime and flush clean water through the
cool spray mist pump.
• Iron an old piece of dampened cotton fabric or linen, to clean the soleplate.