Russell Hobbs Mix & Go 23470-56, Инструкции

Страница: 3 / 4

3
Read the instructions, keep them safe, pass them on if you pass the appliance on. Remove all packaging
before use.
IMPORTANT SAFEGUARDS
Follow basic safety precautions, including:
This appliance can be used by persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they have been
supervised/instructed and understand the hazards involved.
Children must not use or play with the appliance.
Keep the appliance and cable out of reach of children.
To avoid injury, take care handling the blades, emptying the appliance, and
cleaning.
h
Don’t add hot liquid (over 40°C), as it may be ejected due to sudden
steaming.
Misuse of the appliance may cause injury.
Unplug the appliance before assembly, disassembly, or cleaning.
Don’t leave the appliance unattended while plugged in.
If the cable is damaged, it must be replaced by the manufacturer, its service
agent, or someone similarly qualified, to avoid hazard.
• Don’t put the motor unit in liquid.
• Don’t use accessories or attachments other than those we supply.
• Don’t use this appliance for any purpose other than making smoothies.
• Don’t operate the appliance if it’s damaged or malfunctions.
• Don’t run the motor for more than 1 minute, or it may overheat. After 1 minute, switch off for at least
2 minutes, to let the motor cool.
HOUSEHOLD USE ONLY
DIAGRAMS
ins
tru
cti
ons
1. blade unit
2. bottle
3. motor unit
4. lid
5. cap
¬
dishwasher – top rack
BEFORE USING FOR THE FIRST TIME
Clean the appliance before using it for the first time.
USING
1. Sit the motor unit on a dry, firm, level surface.
2. Put the plug into the power socket.
3. Don’t use more than 6 ice cubes.
4. Add liquid ingredients first, then solid ones.
5. Do not fill the appliance past the 600ml mark.
6. Screw the blade unit on to the top of the bottle.
7. Turn the bottle upside down.
8. Align
d
on the bottle with O on the motor unit.
9. Lower the blade unit into the motor unit.
10. Twist the bottle until the
t
is lined up with the I symbol to start the motor.
11. Twist it back until the
t
is lined up with the O symbol to stop the motor.
12. Lift the bottle off the motor unit.
13. Turn the bottle right way up.