4. Put the upper barrel with filter on the support base.
5. Install the top cover.
6. Install the non-woven fabric and rotary cover
.
IMPORTANT NOTES:
1.
The filter must be thoroughly flushed before using the active carbon filter for the first time,
refer to 2 for the method.
2. Open the rotary cover; pour tap water into it, as shown in drawing below
.
3. Please do not pour too much tap water since the filtering speed is slow, stop pouring water
once the upper barrel is full of water.
5.
It is suggested to pour water for filtering when the water level of the lower barrel is lower
than the mark, thus avoiding the risk that the filtered water overflows the base
.