Russell Hobbs Diamond Elite RHC590, Инструкции и гарантия

Страница: 7 / 12

7
• Release the self clean button when done.
• Empty the remaining water from the tank.
• Unplug the iron, and sit the iron on its heel to cool.
• When it is cold, wipe off any moisture.
• Store the iron on its heel, to avoid corrosion and damage to the soleplate.
CLEANING
• Unplug the iron when not in use, and before cleaning.
• Allow the iron to cool down completely before cleaning and storing away.
• Wipe outer surfaces with a damp cloth. If necessary, use a little dishwashing liquid.
• Remove spots, or burnt on fabrics, by ironing a damp cotton or linen cloth with the iron
hot. Take care not to scratch the soleplate.
• Do not immerse the iron in water or any other liquid.
• Do not use harsh or abrasive cleaning agents, solvents or scourers on the soleplate as
these will damage the coating.
AUTO SHUT-OFF
• If the iron is motionless, it will switch off after about 30 seconds lying down, or about 8
minutes if it’s upright.
• The iron will beep and the light will flash continuously until you move the iron.
• To switch on again, lift it up, tilt it forward, then sit it upright to return to operating
temperature. No settings are lost during auto shut-off.
ANTI-SCALE
• The anti-scale agent incorporated in the iron helps prevent the build-up of scale.
• Don’t use a descaling solution, or you’ll destroy the anti-scale agent.
DISPOSAL/RECYCLING
Legislation in some localities mandates that e-waste (anything with a plug, battery or cord)
is disposed of through controlled recycling facilities and must not be disposed of in general
household waste. For more information about recycling of electrical and battery operated
appliances, please contact your local council or your local household waste disposal service.