RHAP2001
Revision 2.1
CLEANING THE FILTER
OPERATING INSTRUCTIONS
The HEPA filter can be cleaned by lightly brushing or vacuuming.
DO NOT WASH USING WATER
If filter performance has degraded sufficiently, filter must be replaced.
Press the Power Button to turn on the Air Purifier. There will be a beep emitted, the light will
then glow on the top section, and the power will start running at the MID setting.
To turn off the appliance, press the power button. A beep will be emitted and the lights will go
off.
When the air purifier is operating, press the Fan Speed Button to cycle through the different power
levels SLEEP / MID / HIGH. The air purifier will emit a beep, and the corresponding indicator will
highlight the setting.
When set to SLEEP mode, if no buttons are touched for 5 seconds, the lights will power off and the air
purifier will run in SLEEP settings.
When the air purifier is operating, press the TIMER button to cycle between OFF/2/4/8 hour timers.
When the air purifier has been running for the set time, it will power down and switch off.
To set the colour, when the air purifier is in MED/HIGH, press the NIGHT LIGHT button. The light
will cycle through blue/cyan/green/yellow/orange/red/purple. When you reach the desired colour
for night light, press the button once more. To turn the light off, press the NIGHT LIGHT button
again.
POWER BUTTON
FAN SPEED BUTTON
TIMER
NIGHT LIGHT
