4
CONTROLS AND LED DISPLAY
To activate a function, touch its icon. The icon will light up brightly and the remaining icons will
be dimly lit to show that they are available for use.
The LED display shows the browning selection you have made using the browning control. The
more lights that are lit, the darker the toast will be. The lights will fade from dim to bright during
the toasting cycle.
Your toaster will revert to the standy mode if no controls are touched or settings changed
within 5 minutes. You can also select standby mode at any time by touching the icon.
COLOUR SENSE TECHNOLOGY
Toasting causes a chemical change called the ‘Maillard Reaction’ which not only browns the
bread but changes its flavour and texture. Traditional toasters heat the bread for a fixed length
of time then eject it. Increasing the time results in browner or darker toast. However, there are
many variables that cause toast to come out differently even if the same settings are used
each time. These include things like the bread’s moisture content or its age or the thickness or
surface texture or if your toaster is hot from a previous toasting cycle. Any of these can cause
the toast to be over or under done when relying on traditional timer-based toasting.
Colour Sense technology continuously reads the surface temperature of the bread during
toasting. Bread surface temperature is linked to toast shade so when the bread reaches your
desired shade, the toaster will end the toasting cycle.
Note:
Colour Sense technology is the default toasting mode. The toaster includes a traditional
(timer based) function for toasting non-bread items or breads with unique compositions.
TOASTING BREAD
1. Sit the toaster upright on a firm, level, heat-resistant surface.
2. Put the plug into the power socket. Your toaster will be in standby mode with only the
icon lit. Touch the icon to activate the controls.
3. Turn the browning control to the required setting. The LEDs will light to show the selection
you have made. The more lights that are lit, the darker the shade of your toast.
4. Put bread into the toasting slots.
5. Press the lever down fully.
6. The cancel icon will light up, and the LED lights will fade up and down as the bread is
toasted.
7. When it’s done, the toast will pop up.
8. To stop toasting at any time touch the cancel icon.
Notes
•
You can adjust the browning control at any time during toasting if you want to change the
toast shade.
•
If you lower the shade setting to a point which has already passed in the toasting cycle,
the toast will pop up.
•
Your toaster will remember the last browning setting you selected.
FROZEN BREAD
1. Place the bread into the slots then touch the frozen icon .
2. Press the lever down to begin toasting. There is no need to change the browning control
from your favourite setting.
3. The icon will light up brightly, and the toasting time will be altered automatically to give
the same degree of browning you would get with unfrozen bread.
REHEATING TOAST
1. Place the cold toast into the slots then touch the reheat icon .
2. Press the lever down to begin reheating. There is no need to change the browning control
from your favourite setting.
4
PARTS
1. Anti scale filter
2. Lid
3. Lid release
4. Infuser
5. Opening
6. Base unit
7. Touch controls and display
8. Select/confirm knob
CONTROLS AND LED DISPLAY
To activate a function, touch its icon. The icon will light up brightly and the remaining
icons will be dimly lit to show that they are available for use.
The LED display shows the water temperature, the selected water temperature or the
steeping/keep warm time depending on the mode your kettle is in.
Your kettle will revert to the standby mode if no controls are touched or settings
changed within 5 minutes. You can also select standby mode at any time by touching
the
C
icon.
PREPARATION AND FILLING
1. Put the base unit on a stable, level surface.
2. Plug the base unit into the wall socket.
3. Remove the kettle from the base unit and press the lid release button.
4. Fill with at least 0.5 L of water, but not above the MAX (1.7 L) mark.
5. Close the lid, and press down to lock it.
6. Place the kettle onto the base unit.
BOILING WATER (100ºC)
1. If your kettle is in standby mode, tap the
C
icon.
2. Tap the
K
icon.
3. The numerical display will show the current water temperature which will start to
rise as your kettle starts to boil the water.
4. When the temperature of the water reaches 100ºC (boiling) your kettle will switch
off.
5. To cancel at any time you can tap the cancel
B
icon, or lift the kettle off the base.
HEATING WATER TO A SELECTED TEMPERATURE
Your kettle’s variable temperature mode allows you to tailor the water temperature to
suit specific teas, coffee and even baby food and milks. The range is adjustable from
40-100ºC.
Heating water to a precise temperature depends on several factors. One of these is the
amount of water you are trying to heat. The final temperature of a small quantity of
water may overshoot the desired temperature. If it is important that the temperature of
the water is exact, we recommend using the Keep Warm feature of your kettle which
will allow the temperature of the water to stabilise naturally.
4
PARTS
1. Anti scale filter
2. Lid
3. Lid release
4. Infuser
5. Opening
6. Base unit
7. Touch controls and display
8. Select/confirm knob
CONTROLS AND LED DISPLAY
To activate a function, touch its icon. The icon will light up brightly and the remaining
icons will be dimly lit to show that they are available for use.
The LED display shows the water temperature, the selected water temperature or the
steeping/keep warm time depending on the mode your kettle is in.
Your kettle will revert to the standby mode if no controls are touched or settings
changed within 5 minutes. You can also select standby mode at any time by touching
the
C
icon.
PREPARATION AND FILLING
1. Put the base unit on a stable, level surface.
2. Plug the base unit into the wall socket.
3. Remove the kettle from the base unit and press the lid release button.
4. Fill with at least 0.5 L of water, but not above the MAX (1.7 L) mark.
5. Close the lid, and press down to lock it.
6. Place the kettle onto the base unit.
BOILING WATER (100ºC)
1. If your kettle is in standby mode, tap the
C
icon.
2. Tap the
K
icon.
3. The numerical display will show the current water temperature which will start to
rise as your kettle starts to boil the water.
4. When the temperature of the water reaches 100ºC (boiling) your kettle will switch
off.
5. To cancel at any time you can tap the cancel
B
icon, or lift the kettle off the base.
HEATING WATER TO A SELECTED TEMPERATURE
Your kettle’s variable temperature mode allows you to tailor the water temperature to
suit specific teas, coffee and even baby food and milks. The range is adjustable from
40-100ºC.
Heating water to a precise temperature depends on several factors. One of these is the
amount of water you are trying to heat. The final temperature of a small quantity of
water may overshoot the desired temperature. If it is important that the temperature of
the water is exact, we recommend using the Keep Warm feature of your kettle which
will allow the temperature of the water to stabilise naturally.
4
PARTS
1. Anti scale filter
2. Lid
3. Lid release
4. Infuser
5. Opening
6. Base unit
7. Touch controls and display
8. Select/confirm knob
CONTROLS AND LED DISPLAY
To activate a function, touch its icon. The icon will light up brightly and the remaining
icons will be dimly lit to show that they are available for use.
The LED display shows the water temperature, the selected water temperature or the
steeping/keep warm time depending on the mode your kettle is in.
Your kettle will revert to the standby mode if no controls are touched or settings
changed within 5 minutes. You can also select standby mode at any time by touching
the
C
icon.
PREPARATION AND FILLING
1. Put the base unit on a stable, level surface.
2. Plug the base unit into the wall socket.
3. Remove the kettle from the base unit and press the lid release button.
4. Fill with at least 0.5 L of water, but not above the MAX (1.7 L) mark.
5. Close the lid, and press down to lock it.
6. Place the kettle onto the base unit.
BOILING WATER (100ºC)
1. If your kettle is in standby mode, tap the
C
icon.
2. Tap the
K
icon.
3. The numerical display will show the current water temperature which will start to
rise as your kettle starts to boil the water.
4. When the temperature of the water reaches 100ºC (boiling) your kettle will switch
off.
5. To cancel at any time you can tap the cancel
B
icon, or lift the kettle off the base.
HEATING WATER TO A SELECTED TEMPERATURE
Your kettle’s variable temperature mode allows you to tailor the water temperature to
suit specific teas, coffee and even baby food and milks. The range is adjustable from
40-100ºC.
Heating water to a precise temperature depends on several factors. One of these is the
amount of water you are trying to heat. The final temperature of a small quantity of
water may overshoot the desired temperature. If it is important that the temperature of
the water is exact, we recommend using the Keep Warm feature of your kettle which
will allow the temperature of the water to stabilise naturally.
4
PARTS
1. Anti scale filter
2. Lid
3. Lid release
4. Infuser
5. Opening
6. Base unit
7. Touch controls and display
8. Select/confirm knob
CONTROLS AND LED DISPLAY
To activate a function, touch its icon. The icon will light up brightly and the remaining
icons will be dimly lit to show that they are available for use.
The LED display shows the water temperature, the selected water temperature or the
steeping/keep warm time depending on the mode your kettle is in.
Your kettle will revert to the standby mode if no controls are touched or settings
changed within 5 minutes. You can also select standby mode at any time by touching
the
C
icon.
PREPARATION AND FILLING
1. Put the base unit on a stable, level surface.
2. Plug the base unit into the wall socket.
3. Remove the kettle from the base unit and press the lid release button.
4. Fill with at least 0.5 L of water, but not above the MAX (1.7 L) mark.
5. Close the lid, and press down to lock it.
6. Place the kettle onto the base unit.
BOILING WATER (100ºC)
1. If your kettle is in standby mode, tap the
C
icon.
2. Tap the
K
icon.
3. The numerical display will show the current water temperature which will start to
rise as your kettle starts to boil the water.
4. When the temperature of the water reaches 100ºC (boiling) your kettle will switch
off.
5. To cancel at any time you can tap the cancel
B
icon, or lift the kettle off the base.
HEATING WATER TO A SELECTED TEMPERATURE
Your kettle’s variable temperature mode allows you to tailor the water temperature to
suit specific teas, coffee and even baby food and milks. The range is adjustable from
40-100ºC.
Heating water to a precise temperature depends on several factors. One of these is the
amount of water you are trying to heat. The final temperature of a small quantity of
water may overshoot the desired temperature. If it is important that the temperature of
the water is exact, we recommend using the Keep Warm feature of your kettle which
will allow the temperature of the water to stabilise naturally.
4
PARTS
1. Anti scale filter
2. Lid
3. Lid release
4. Infuser
5. Opening
6. Base unit
7. Touch controls and display
8. Select/confirm knob
CONTROLS AND LED DISPLAY
To activate a function, touch its icon. The icon will light up brightly and the remaining
icons will be dimly lit to show that they are available for use.
The LED display shows the water temperature, the selected water temperature or the
steeping/keep warm time depending on the mode your kettle is in.
Your kettle will revert to the standby mode if no controls are touched or settings
changed within 5 minutes. You can also select standby mode at any time by touching
the
C
icon.
PREPARATION AND FILLING
1. Put the base unit on a stable, level surface.
2. Plug the base unit into the wall socket.
3. Remove the kettle from the base unit and press the lid release button.
4. Fill with at least 0.5 L of water, but not above the MAX (1.7 L) mark.
5. Close the lid, and press down to lock it.
6. Place the kettle onto the base unit.
BOILING WATER (100ºC)
1. If your kettle is in standby mode, tap the
C
icon.
2. Tap the
K
icon.
3. The numerical display will show the current water temperature which will start to
rise as your kettle starts to boil the water.
4. When the temperature of the water reaches 100ºC (boiling) your kettle will switch
off.
5. To cancel at any time you can tap the cancel
B
icon, or lift the kettle off the base.
HEATING WATER TO A SELECTED TEMPERATURE
Your kettle’s variable temperature mode allows you to tailor the water temperature to
suit specific teas, coffee and even baby food and milks. The range is adjustable from
40-100ºC.
Heating water to a precise temperature depends on several factors. One of these is the
amount of water you are trying to heat. The final temperature of a small quantity of
water may overshoot the desired temperature. If it is important that the temperature of
the water is exact, we recommend using the Keep Warm feature of your kettle which
will allow the temperature of the water to stabilise naturally.
5
FROZEN BREAD
1.
Place the bread into the slots then touch the frozen icon
f
.
2.
Press the lever down to begin toasting. There is no need to change the browning control from your
favourite setting.
3.
The
f
icon will light up brightly, and the toasting time will be altered automatically to give the same
degree of browning you would get with unfrozen bread.
REHEATING TOAST
1.
Place the cold toast into the slots then touch the reheat icon
m
.
2.
Press the lever down to begin reheating. There is no need to change the browning control from your
favourite setting.
3.
The
m
icon will light up brightly, and the toast will be given a short burst of heat.
4.
Don’t reheat toast that has been buttered, or torn, or misshapen bread.
TRADITIONAL (TIMED) TOASTING
You can use your toaster in the same way as a traditional (timer based) toaster. This is useful when you
want to cook items like pop tarts or use toasting bags to make toasties.
1.
Turn the browning control to the required setting. The LEDs will light to show the selection you have
made. The more lights that are lit, the longer the toasting cycle.
2.
Put the item to be toasted into the toasting slots.
3.
Press the lever down fully. Touch the
Q
(timer) icon.
4.
The cancel icon
B
will light up, and the LED lights will fade up and down as the toasting cycle runs.
5.
When the cycle finishes, the item will pop up.
•
The Colour Sense technology does not operate in this mode so there may be variations between
sucessive cycles.
•
The next time you use your toaster it will default back to using Colour Sense technology.
WARMING RACK
Don’t use the warming rack to warm frozen, buttered, or items with fillings or coatings.
1.
Fit the warming rack on top of the toaster with the feet inside the slots.
2.
Place the items to be warmed on top of the warming rack.
3.
Turn the browning control until the first LED is lit.
4.
Touch the
Q
(timer) icon.
5.
When the lever pops up, remove the warmed items.
6.
Don’t touch the metal parts of the warming rack as they will be hot.
•
Remove the warming rack before using the toaster normally.
OVERHEAT PROTECTION
It is possible for your toaster to overheat if it is used several times in quick succession. If this happens, the
lever will not latch in the down position. To show that your toaster is cooling down, all six LEDs will come
on then slowly turn off one by one. This pattern will repeat until your toaster has cooled down sufficiently
for it to be operated again normally.
GB
DE
FR
NL
IT
ES
PT
DK
SE
NO
FI
RU
CZ
SK
PL
HR
SI
GR
HU
TR
RO
BG
UA
AE
5
FROZEN BREAD
1.
Place the bread into the slots then touch the frozen icon
f
.
2.
Press the lever down to begin toasting. There is no need to change the browning control from your
favourite setting.
3.
The
f
icon will light up brightly, and the toasting time will be altered automatically to give the same
degree of browning you would get with unfrozen bread.
REHEATING TOAST
1.
Place the cold toast into the slots then touch the reheat icon
m
.
2.
Press the lever down to begin reheating. There is no need to change the browning control from your
favourite setting.
3.
The
m
icon will light up brightly, and the toast will be given a short burst of heat.
4.
Don’t reheat toast that has been buttered, or torn, or misshapen bread.
TRADITIONAL (TIMED) TOASTING
You can use your toaster in the same way as a traditional (timer based) toaster. This is useful when you
want to cook items like pop tarts or use toasting bags to make toasties.
1.
Turn the browning control to the required setting. The LEDs will light to show the selection you have
made. The more lights that are lit, the longer the toasting cycle.
2.
Put the item to be toasted into the toasting slots.
3.
Press the lever down fully. Touch the
Q
(timer) icon.
4.
The cancel icon
B
will light up, and the LED lights will fade up and down as the toasting cycle runs.
5.
When the cycle finishes, the item will pop up.
•
The Colour Sense technology does not operate in this mode so there may be variations between
sucessive cycles.
•
The next time you use your toaster it will default back to using Colour Sense technology.
WARMING RACK
Don’t use the warming rack to warm frozen, buttered, or items with fillings or coatings.
1.
Fit the warming rack on top of the toaster with the feet inside the slots.
2.
Place the items to be warmed on top of the warming rack.
3.
Turn the browning control until the first LED is lit.
4.
Touch the
Q
(timer) icon.
5.
When the lever pops up, remove the warmed items.
6.
Don’t touch the metal parts of the warming rack as they will be hot.
•
Remove the warming rack before using the toaster normally.
OVERHEAT PROTECTION
It is possible for your toaster to overheat if it is used several times in quick succession. If this happens, the
lever will not latch in the down position. To show that your toaster is cooling down, all six LEDs will come
on then slowly turn off one by one. This pattern will repeat until your toaster has cooled down sufficiently
for it to be operated again normally.
GB
DE
FR
NL
IT
ES
PT
DK
SE
NO
FI
RU
CZ
SK
PL
HR
SI
GR
HU
TR
RO
BG
UA
AE
5
FROZEN BREAD
1.
Place the bread into the slots then touch the frozen icon
f
.
2.
Press the lever down to begin toasting. There is no need to change the browning control from your
favourite setting.
3.
The
f
icon will light up brightly, and the toasting time will be altered automatically to give the same
degree of browning you would get with unfrozen bread.
REHEATING TOAST
1.
Place the cold toast into the slots then touch the reheat icon
m
.
2.
Press the lever down to begin reheating. There is no need to change the browning control from your
favourite setting.
3.
The
m
icon will light up brightly, and the toast will be given a short burst of heat.
4.
Don’t reheat toast that has been buttered, or torn, or misshapen bread.
TRADITIONAL (TIMED) TOASTING
You can use your toaster in the same way as a traditional (timer based) toaster. This is useful when you
want to cook items like pop tarts or use toasting bags to make toasties.
1.
Turn the browning control to the required setting. The LEDs will light to show the selection you have
made. The more lights that are lit, the longer the toasting cycle.
2.
Put the item to be toasted into the toasting slots.
3.
Press the lever down fully. Touch the
Q
(timer) icon.
4.
The cancel icon
B
will light up, and the LED lights will fade up and down as the toasting cycle runs.
5.
When the cycle finishes, the item will pop up.
•
The Colour Sense technology does not operate in this mode so there may be variations between
sucessive cycles.
•
The next time you use your toaster it will default back to using Colour Sense technology.
WARMING RACK
Don’t use the warming rack to warm frozen, buttered, or items with fillings or coatings.
1.
Fit the warming rack on top of the toaster with the feet inside the slots.
2.
Place the items to be warmed on top of the warming rack.
3.
Turn the browning control until the first LED is lit.
4.
Touch the
Q
(timer) icon.
5.
When the lever pops up, remove the warmed items.
6.
Don’t touch the metal parts of the warming rack as they will be hot.
•
Remove the warming rack before using the toaster normally.
OVERHEAT PROTECTION
It is possible for your toaster to overheat if it is used several times in quick succession. If this happens, the
lever will not latch in the down position. To show that your toaster is cooling down, all six LEDs will come
on then slowly turn off one by one. This pattern will repeat until your toaster has cooled down sufficiently
for it to be operated again normally.
GB
DE
FR
NL
IT
ES
PT
DK
SE
NO
FI
RU
CZ
SK
PL
HR
SI
GR
HU
TR
RO
BG
UA
AE
