6
KEEP WARM MODE
This mode allows you to keep the heated water at a specific temperature. The keep warm
mode can be set from 1 to 40 minutes.
1. Tap the icon.
2. Turn the select/confirm knob until the desired keep warm time is shown on the numerical
display. Turning the control slowly will increase/decrease the time in 1 minute intervals.
Turning the control quickly will increase/decrease the time in 5 minute intervals.
3. Press the select/confirm knob . The last used temperature will then be displayed.
4. Turn the select/confirm knob to adjust desired temperature (or skip this step if the current
temperature is already correct).
5. Press the select/confirm knob to start the countdown.
6.
Your kettle will beep when the time is up.
7. To cancel at any time you can tap the cancel icon.
BOIL DRY PROTECTION
If your kettle boils dry, a safety cut-out device will automatically switch it off. If this happens,
unplug your kettle and allow it to cool down until the cut-out resets itself. Allowing your kettle to
boil dry will shorten the life of the element.
CARE AND MAINTENANCE
1. Unplug the stand, and let the kettle cool before cleaning.
2. Wipe all surfaces with a clean damp cloth.
3. Open the lid.
4. Squeeze the two lugs together on the anti scale filter then remove it from the kettle.
5. Rinse it under a running tap while brushing with a soft brush.
6. Insert the anti scale filter back into the kettle and push it into place until it clicks.
DESCALE REGULARLY (AT LEAST MONTHLY).
Descale the appliance at least monthly with a proprietary descaler. Follow the instructions on
the package of descaler.
Products returned under guarantee with faults due to scale will be subject to a repair charge.
DISPOSAL/RECYCLING
Legislation in some localities mandates that e-waste (anything with a plug, battery or cord)
is disposed of through controlled recycling facilities and must not be disposed of in general
household waste. For more information about recycling of electrical and battery operated
appliances, please contact your local council or your local household waste disposal service.
Spectrum Brands Australia Pty Ltd
Locked Bag 3004 Braeside
Victoria 3195 Australia
Customer Service in Australia
TollFree: 1800 623 118
Email: [email protected]
Website: www.spectrumbrands.com.au
Spectrum Brands New Zealand Ltd
PO Box 9817 Newmarket
Auckland 1149 New Zealand
Customer Service in New Zealand
TollFree: 0800 736 776
Email: [email protected]
Website: www.spectrumbrands.co.nz
Spectrum Brands Australia Pty Ltd and Spectrum Brands New Zealand Ltd
Warranty Against Defects
In this warranty:
Australian Consumer Law
means the Australian consumer law set out in Schedule 2 to the
Competition and Consumer Act 2010;
CGA
means the New Zealand Consumer Guarantees Act 1993;
Goods means the product or equipment which was accompanied by this warranty and
purchased in Australia or New Zealand, as the case may be;
Manufacturer
,
We
or
us
means:
1. for Goods purchased in Australia, Spectrum Brands Australia Pty Ltd ABN, 78 007 070 573;
or
2. for Goods purchased in New Zealand, Spectrum Brands New Zealand Ltd, as the case
may be, contact details as set out at the end of this warranty;
Supplier means the authorised distributor or retailer of the Goods that sold you the Goods in
Australia or in New Zealand; and
You means you, the original end-user purchaser of the Goods.
1. Our goods come with guarantees that cannot be excluded under the Australian Consumer
Law, or the CGA. You are entitled to a replacement or refund for a major failure and
compensation for any other reasonably foreseeable loss or damage. You are also entitled
to have the goods repaired or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
2. The benefits provided by this Warranty are in addition to all other rights and remedies in
respect of the Goods which the consumer has under either the Australian Consumer Law
or the CGA. The original purchaser of the Goods is provided with the following Warranty
subject to the Warranty Conditions:
3. We warrant the Goods for all parts defective in workmanship or materials from the date
of purchase, for the period of 2 years from the date of purchase (
Warranty Period
).
If the Goods prove defective within the Warranty Period by reason of improper workmanship
or material, we may, at our own discretion, repair or replace the Goods without charge.
We suggest you use local waste management centres to recycle this product at end of life.
Warranty Conditions
4. The Goods must be used in accordance with the manufacturer’s instructions. This
Warranty does not apply should the defect in or failure of the Goods be attributable
to misuse, abuse, accident or non-observance of manufacturer’s instructions on the
part of the user. As far as the law permits, the manufacturer does not accept liability
for any direct or consequential loss, damage or other expense caused by or arising
out of any failure to use the Goods in accordance with the manufacturer’s instructions.
5. Exhaustible components (such as batteries, ironing board cover, filters and brushes) of
the Goods are included under this Warranty only where there is a defect in
workmanship or materials used.
6. The warranty granted under clause 3 is limited to repair or replacement only.
7. Any parts of the Goods replaced during repairs or any product replaced remain the
property of the manufacturer. In the event of the Goods being replaced during the
Warranty Period, the warranty on the replacement Goods will expire on the same
date as for the Warranty Period on the original Goods which are replaced.
8. In order to claim under the warranty granted under clause 3 you must:
(a) Retain this warranty with your receipt/proof of purchase; and
(b) Return the Goods to us at the relevant address or to the Supplier by prepaid
freight within the Warranty Period accompanied with (i) the legible and unmodified
original proof of purchase, which clearly indicates the name and address of the
Supplier, the date and place of purchase, the product name or other product serial
number and (ii) this warranty.
9. This warranty is immediately void if:
(a) Any serial number or appliance plate is removed or defaced;
(b) The Goods have been serviced or otherwise repaired by a person not authorised
to do so by us or where non approved replaced parts are used.
10. The Goods are designed for domestic use only. The Goods must be connected to the
electrical voltage requirements as specified in the ratings label located on the Goods.
11. This warranty does not cover the cost of claiming under the warranty or transport
of the Goods to and from the Supplier or us.
12. This warranty is only valid and enforceable in Australia against Spectrum Brands
Australia Pty Ltd and in New Zealand against Spectrum Brands New Zealand Ltd.
Contact us or the Supplier for further details.
Register your product online
If you live in Australia please visit: www.spectrumbrands.com.au/warranty
If you live in New Zealand Please visit: www.spectrumbrands.co.nz/warranty
Registration of your warranty is not compulsory, it gives us a record of your purchase
AND entitles you to receive these benefits: Product information; Hints and tips; Recipes
and news; Information on special price offers and promotions.
Any questions?
Please contact Customer Service for advice.
4
PARTS
1. Anti scale filter
2. Lid
3. Lid release
4. Infuser
5. Opening
6. Base unit
7. Touch controls and display
8. Select/confirm knob
CONTROLS AND LED DISPLAY
To activate a function, touch its icon. The icon will light up brightly and the remaining
icons will be dimly lit to show that they are available for use.
The LED display shows the water temperature, the selected water temperature or the
steeping/keep warm time depending on the mode your kettle is in.
Your kettle will revert to the standby mode if no controls are touched or settings
changed within 5 minutes. You can also select standby mode at any time by touching
the
C
icon.
PREPARATION AND FILLING
1. Put the base unit on a stable, level surface.
2. Plug the base unit into the wall socket.
3. Remove the kettle from the base unit and press the lid release button.
4. Fill with at least 0.5 L of water, but not above the MAX (1.7 L) mark.
5. Close the lid, and press down to lock it.
6. Place the kettle onto the base unit.
BOILING WATER (100ºC)
1. If your kettle is in standby mode, tap the
C
icon.
2. Tap the
K
icon.
3. The numerical display will show the current water temperature which will start to
rise as your kettle starts to boil the water.
4. When the temperature of the water reaches 100ºC (boiling) your kettle will switch
off.
5. To cancel at any time you can tap the cancel
B
icon, or lift the kettle off the base.
HEATING WATER TO A SELECTED TEMPERATURE
Your kettle’s variable temperature mode allows you to tailor the water temperature to
suit specific teas, coffee and even baby food and milks. The range is adjustable from
40-100ºC.
Heating water to a precise temperature depends on several factors. One of these is the
amount of water you are trying to heat. The final temperature of a small quantity of
water may overshoot the desired temperature. If it is important that the temperature of
the water is exact, we recommend using the Keep Warm feature of your kettle which
will allow the temperature of the water to stabilise naturally.
5
1. If your kettle is in standby mode, tap the
C
icon.
2. Tap the
M
icon.
3. The numerical display will show the last selected water temperature.
4. Turn the select/confirm knob until the desired temperature is displayed.
5. Press the select/confirm knob
G
to start heating the water.
6. To cancel at any time you can tap the cancel
B
icon, or lift the kettle off the base.
TEMPERATURE GUIDE
Tea Type
Temperature °C
Brewing time (min)
Black
90 – 100
3 - 5
Oolong
70 – 80
2 – 3
White tea
70 – 80
1 – 3
Green tea
70 – 85
1 - 3
Rooibos
90 – 100
5 - 6
Hibiscus
70 – 75
5 - 7
Pu-erh
80 – 100
2 - 5
Mate
90 – 100
5 - 6
Herbal/Fruit
90 – 100
3 - 5
Coffee
Temperature °C
Brewing time (min)
Instant coffee
85 - 95
-
Filter ground coffee
80 - 90
-
For baby milk/formula, follow the manufacturer’s instructions, or local health authority
guidance.
USING THE INFUSER AND STEEP TIMER
The steep timer allows you to time infusions when using the infuser accessory. You
must first heat the water to the desired temperature see HEATING WATER TO A
SELECTED TEMPERATURE. The timer can be set from 1 to 40 minutes.
Note
: When using the infuser, only fill your kettle to the 1.5L marking. This will allow
room for the infuser and its contents when you insert it into the kettle, and prevent
water from being displaced out of the spout.
1. Prepare the infuser accessory by putting the desired amount of tea leaves into it.
2. When the water reaches the desired temperature, open the lid and put the infuser
into your kettle. The opening in the infuser should face the handle.
3. Tap the
N
icon.
5
1. If your kettle is in standby mode, tap the
C
icon.
2. Tap the
M
icon.
3. The numerical display will show the last selected water temperature.
4. Turn the select/confirm knob until the desired temperature is displayed.
5. Press the select/confirm knob
G
to start heating the water.
6. To cancel at any time you can tap the cancel
B
icon, or lift the kettle off the base.
TEMPERATURE GUIDE
Tea Type
Temperature °C
Brewing time (min)
Black
90 – 100
3 - 5
Oolong
70 – 80
2 – 3
White tea
70 – 80
1 – 3
Green tea
70 – 85
1 - 3
Rooibos
90 – 100
5 - 6
Hibiscus
70 – 75
5 - 7
Pu-erh
80 – 100
2 - 5
Mate
90 – 100
5 - 6
Herbal/Fruit
90 – 100
3 - 5
Coffee
Temperature °C
Brewing time (min)
Instant coffee
85 - 95
-
Filter ground coffee
80 - 90
-
For baby milk/formula, follow the manufacturer’s instructions, or local health authority
guidance.
USING THE INFUSER AND STEEP TIMER
The steep timer allows you to time infusions when using the infuser accessory. You
must first heat the water to the desired temperature see HEATING WATER TO A
SELECTED TEMPERATURE. The timer can be set from 1 to 40 minutes.
Note
: When using the infuser, only fill your kettle to the 1.5L marking. This will allow
room for the infuser and its contents when you insert it into the kettle, and prevent
water from being displaced out of the spout.
1. Prepare the infuser accessory by putting the desired amount of tea leaves into it.
2. When the water reaches the desired temperature, open the lid and put the infuser
into your kettle. The opening in the infuser should face the handle.
3. Tap the
N
icon.
5
1. If your kettle is in standby mode, tap the
C
icon.
2. Tap the
M
icon.
3. The numerical display will show the last selected water temperature.
4. Turn the select/confirm knob until the desired temperature is displayed.
5. Press the select/confirm knob
G
to start heating the water.
6. To cancel at any time you can tap the cancel
B
icon, or lift the kettle off the base.
TEMPERATURE GUIDE
Tea Type
Temperature °C
Brewing time (min)
Black
90 – 100
3 - 5
Oolong
70 – 80
2 – 3
White tea
70 – 80
1 – 3
Green tea
70 – 85
1 - 3
Rooibos
90 – 100
5 - 6
Hibiscus
70 – 75
5 - 7
Pu-erh
80 – 100
2 - 5
Mate
90 – 100
5 - 6
Herbal/Fruit
90 – 100
3 - 5
Coffee
Temperature °C
Brewing time (min)
Instant coffee
85 - 95
-
Filter ground coffee
80 - 90
-
For baby milk/formula, follow the manufacturer’s instructions, or local health authority
guidance.
USING THE INFUSER AND STEEP TIMER
The steep timer allows you to time infusions when using the infuser accessory. You
must first heat the water to the desired temperature see HEATING WATER TO A
SELECTED TEMPERATURE. The timer can be set from 1 to 40 minutes.
Note
: When using the infuser, only fill your kettle to the 1.5L marking. This will allow
room for the infuser and its contents when you insert it into the kettle, and prevent
water from being displaced out of the spout.
1. Prepare the infuser accessory by putting the desired amount of tea leaves into it.
2. When the water reaches the desired temperature, open the lid and put the infuser
into your kettle. The opening in the infuser should face the handle.
3. Tap the
N
icon.
