7. To pour a cup of coffee before the
brew cycle is complete, simply
remove the Carafe from the
Warming Plate and pour (see “Drip
Stop Feature”). Brewing will
continue but dripping will
automatically pause. Return the
Carafe to the Warming Plate within
1 minute; dripping will resume.
CAUTION:
To prevent injury when
utilizing Drip Stop feature, replace
Carafe within 1 minute of removing
during brewing process.
8. Upon completion of the brew cycle,
wait until dripping has stopped
before removing the Carafe. The
Carafe Lid should be kept in place
to facilitate safe serving.
9. To brew another Carafe of coffee,
turn unit OFF and wait 10 minutes
to allow heating element to cool.
Important: If the unit is not allowed
to cool before immediate repeated
use, water placed in Water
Reservoir may become
overheated and a spray of steam
may be released from the opening,
creating a risk of burns.
10. When not in use, unplug the Base
from the wall outlet. Allow the unit
to cool completely before cleaning
(see User Maintenance
Instructions).
Drip Stop Feature
The Drip Stop Feature lets you pour a
cup of coffee before brewing is
complete. The automatic Drip Stop
allows you to pour a cup without the
brew basket leaking.
Important:
When using the Drip Stop Feature
while the coffee maker is still brewing,
the Carafe with Lid must be replaced
on the Warming Plate, under the Filter
Basket within 1 minute to prevent the
Filter Basket from overflowing.
CAUTION:
Do not pull out the Filter
Basket when using this feature as it is
filled with hot coffee. Be sure the
Carafe is placed all the way back into
the unit to continue brewing.
Brewing A Second Pot
Of Coffee
As mentioned above, it is
recommended that the Coffee maker
should be OFF for 10 minutes
between cycles, in order to allow unit
to cool. While the unit is OFF rinse the
Carafe, Permanent Filter and the
Removable Filter Basket in water.
Place the filter in the basket. Then
repeat the brewing procedure.
Using the Timer Control
Your Coffee maker has a built in
multifunction Timer. The following
sections describe the correct use of
the Timer.
Setting The Clock
To set the clock, simply press the
HOUR and MIN Buttons. First press
the HOUR Button until the desired
hour has been reached. Make sure
the correct “AM/PM” indicator is
shown on the left side of the LCD
Display. Press the MIN Button until
the desired minutes have been
reached. You may press and hold the
HOUR or MIN Buttons to display the
correct time more rapidly.
Note:
Unplugging the unit will reset
the clock to 12:00.
7
