Russell Hobbs 22780, Руководство пользователя

Страница: 4 / 8

4
2. This may smell and smoke a little but it’s nothing to worry about. Ensure the room is well
ventilated.
3. Turn the timer control anticlockwise to the
6
position, turn the selector switch to
n
and allow the hotplates to heat up for about 5 minutes.
4. After 5 minutes, turn the selector switch to the
1
setting and the temperature control to
230ºC. Turn the timer control to 20 minutes.
5. After the timer bell sounds, the elements of your mini kitchen have been cured. You will not
have to do this again.
USING THE HOTPLATES
• Use good quality, flat-bottomed pans that make good contact with the hotplate.
• The base of the pan should be the same size as the hotplate or slightly wider.
• The temperature control does not control the temperature of the hotplates.
1. Select which hotplate you want to use with the selector switch:
Select
£
for the left hotplate.
Select
_
for the right hotplate.
Select
n
for both hotplates.
GRILLING
• The rack and tray slide on the shelf supports at the sides of the oven. Use the lower
supports for baking and roasting. Use the upper supports for grilling, toasting, and
browning toppings.
• If you’re not cooking on the tray, slide it between the bottom shelf supports to catch drips.
• If you are using the tray, you can clip the handle to it.
1. Select the upper element
2
using the selector switch.
2. Set the temperature control to 230ºC. (you can select a lower temperature if desired).
3. Place the food to be grilled onto the rack or tray.
• Watch out for fat or juices spitting, and food coming into contact with the upper element.
• If this happens, move the food down to a lower support position.
• Spitting will make cleaning difficult.
• Residues burned on to the top element may shorten its life.
USING THE OVEN
• The rack and tray can be used during oven cooking.
1. Select which element you want to use with the selector switch:
Select
2
for the top element.
Select
3
for the bottom element.
Select
1
for both elements.
2. Set the required temperature using the temperature control.