Russell Hobbs 20613, Руководство пользователя

Страница: 4 / 8

4
PARTS
1. Filter
2. Lid
3. Lid lock
4. Water level gauge
5. Switch
6. Stand
BEFORE USING FOR THE FIRST TIME
Fill to max , boil, discard the water, then rinse. Do this twice to remove
any manufacturing dust, etc.
FILLING
7. Press the lid lock to open the lid.
8. Fill with at least 2 cups of water, but don’t fill above the max mark.
9. If you overfill, the kettle may spit boiling water.
10. Close the lid, and press it down, to lock it closed.
11. Check the lid is closed, or the kettle won’t switch off when it boils.
USING YOUR KETTLE
1. Put the stand on a stable, level surface.
2. Plug the stand into the wall socket.
3. Put the kettle on the stand.
4. Move the switch to the I position. The light will come on and the kettle
will heat up.
5. When the water boils, the kettle will switch itself off and the light will
go out.
6. To switch off manually, move the switch to O or lift the kettle off the
stand.
GENERAL
• Remove the kettle from the stand before pouring.
• To avoid the risk of splashing, pour slowly and don’t over-tilt the kettle.
• Don’t tilt the kettle backwards – water might get on to the control
area.
• If this happens, let the kettle dry before use – put it somewhere warm
for 12 hours.
• When you lift the kettle, you may see moisture on the stand. Don’t
worry it’s the steam used to switch the kettle off automatically, which
then condenses and escapes through vents under the kettle.