5
25 Set the timer to the time you want to start brewing.
a) Press and release the
T
button again.
b) TIMER will appear on the display.
c) Use the
h
and
min
buttons to set the correct hour and minute.
,
If you don’t press either the
h
or
min
buttons within 8 seconds, the coffee maker will
revert to “normal”, and the time will show. You’ll have to press the
T
button, and
start again.
26 Press and release the
Z
button – the
Z
light will glow.
27 When the set time is reached, the
Z
light will go off, the
e
light will come on, and
brewing will start.
28 If you want to cancel the timer before brewing has started, press the
Z
button.
29 If you want to stop the coffee maker while it’s brewing, press the
e
button.
C
FINISHED?
30 Press and release the
e
button – the
e
light will go off.
31 Unplug, and let the appliance cool down fully before cleaning, or for about 10
minutes before refilling.
C
AUTO SHUT-OFF
32 About 2 hours after brewing, the coffee maker will shut down. The hotplate and the
e
light will go off.
33 If left for much more than an hour, chemical changes in the coffee liquor start to
affect the flavour. It’s best to pour it away and make a fresh pot.
C
A QUICK CUP
34 If you want a quick cup of coffee before the brewing cycle has finished:
35 You can remove the carafe at any time. The non-drip valve will prevent coffee
dripping on to the hotplate.
36 To prevent the filter holder overflowing, replace the carafe on the hotplate within
about 20 seconds. This may not sound much, but you’ll find it’s more than enough
time to pour a couple of cups of coffee.
37 When you replace the carafe on the hotplate, the non-drip valve opens, to let any
remaining coffee through.
C
CARE AND MAINTENANCE
38 Unplug the appliance and let it cool down before cleaning or storing away.
39 Use the grip to open the lid.
40 Lift out the filter.
41 Tip the contents of the filter into the bin. Don’t flush coffee grounds down the sink.
They’ll build up and cause a blockage.
42 Lift out the filter holder.
43 You may clean the carafe, filter, and filter holder in warm soapy water. Rinse
thoroughly afterwards, to remove all traces of soap.
44 Clean the outside surfaces of the appliance with a damp cloth.
45 Replace the filter holder.
46 Drop the filter into the filter holder.
47 Close the lid.
