5
suction control
18 There are two ways to control the suction:
a) The suction control on top of the cleaner – turn it clockwise to increase the cleaning
power, anti-clockwise to decrease the power.
b) The suction control on the nozzle – move it towards the nozzle for maximum suction,
away from the nozzle, to reduce suction.
plug in
caution
If you’ve accidentally pressed the on/off switch, the cleaner could come on when you
plug it in. This could give you a bit of a start, so be careful.
19 Plug the cable into a socket near the area to be cleaned (switch the socket on, if it’s
switchable).
switching on
20 Press and release the on/off switch
3
, to turn the cleaner on.
cleaning
21 Move the tool over the surface, cleaning a small area at a time.
22 When you move to a new area, overlap the previous area, to make sure none of the surface is
missed.
switching off
23 If you’ve finished, if you want to change tools, or if you just want to stop for a rest, press and
release the on/off switch
3
, to turn the cleaner off.
finished cleaning?
24 Press and release the on/off switch
3
, to turn the cleaner off.
25 Unplug the cleaner.
26 Stand clear of the cable, and press the cable rewind
C
, the cable will rewind.
27 Keep clear of the cable, as it rewinds at a fair lick. If it catches on anything, stop pressing, and
it’ll stop rewinding.
28 We’ve tried not to make it too powerful, to avoid wrecking your home, so you may need to
push the plug end into the storage area manually.
removing and emptying the bin
29 You don’t have to empty the bin after each use, but it’s a very good idea. Your cleaner will
happily work till it’s chock full, but you’ll be wasting energy swirling yesterday’s dust around.
Energy that could be better used sucking up today’s dust.
30 There’s a “bin full indicator” on top of the bin. It’s eye-shaped, and it’s just below the bin
handle.
31 If it shows red, when suction is at maximum, and the nozzle is off the floor, then you should
empty the bin right away.
32 Switch off, unplug, and leave it for a minute, to let the dust settle.
33 Press in the lock on the hose end, and pull the hose out of the cleaner – this’ll keep the hose
out of your way.
34 Lift the bin handle till it stops (about 80 degrees). Then lift the bin up and out of the cleaner.
35 Lower the bin into your dustbin so the bottom of the bin is below the rim – this’ll prevent the
dust dispersing into your environment.
36 Press the top of the latch, to open the bottom of the bin, and dump its contents into the
dustbin. Give the bin a couple of taps, to shake all the dirt loose.
37 Lift the bottom of the bin up to close it.
check the filters
38 While emptying the bin, check the filters. Blocked filters quickly reduce suction, and they’re
easy to clean.
Содержание 14720
Страница 2: ...2...
