5
15 Don’t run the mixer continuously for more than 3 minutes,
to avoid overheating. After 3 minutes, let it cool for 5
minutes before reusing.
16 Don’t try to sit the mixer on it’s end – it’ll fall over.
timings and speeds
17 If you’re using a recipe book, follow the recipe.
18 If you’ve no recipe, you’ll need to experiment to find the
best settings.
19 Timing and speed will vary with the amount, thickness,
and composition of the mix.
20 Generally, large quantities, thick mixes, and a high ratio of
solids to liquids suggest longer timings and slower speeds.
21 Smaller quantities, thinner mixes, and more liquids than
solids suggest shorter timings and higher speeds.
22 Speed and timing aren’t critical. If you’re unsure, use bursts.
Switch on, switch off, look/feel/taste, till it feels right.
care and maintenance
Switch off (0) and unplug before cleaning.
Wipe outer surfaces a damp cloth. If necessary, use a little
washing-up liquid.
Wash the whisks in hot soapy water, rinse, and dry.
Don’t put the mixer in water or any other liquid.
Don’t use harsh or abrasive cleaning agents or solvents.
connection
This product doesn’t need an earth. Use a 13A
BS1362 fuse in a 13A BS1363 plug. Fit the blue
wire to N, and the brown wire to L. Fit the cord
grip. If in doubt, call an electrician. Don’t use
a non-rewireable plug unless the fuse cover is
fitted. If you remove the plug, dispose of it.
