background image

8

connection

The product must be earthed. It has a 13A BS1362 fuse in a 13A BS1363 
plug. To replace the plug, fit the green/yellow wire to 

E

 or E, the blue 

wire to N, and the brown wire to L. Fit the cord grip.
If in doubt, call an electrician.
Don’t use a non-rewireable/moulded plug unless the fuse cover is in 
place. If you remove the plug, dispose of it.

service

If you ring Customer Service, please have the 

Model No

 to hand, as we won’t be able to 

help you without it. It’s on the rating plate (usually underneath the product).
The product isn’t user-serviceable. If it’s not working, read the instructions, check the 
plug fuse and main fuse/circuit breaker. If it’s still not working, consult your retailer. If 
that doesn’t solve the problem:
Pack carefully, with a note of your name, address, day phone number, and what’s 
wrong. If under guarantee, say where and when purchased, and include proof of 
purchase (till receipt). Send it to Customer Returns (address below right). They’ll give 
you an estimate for inspection/repair.

Customer Service

 

Customer Returns

(correspondence only) 

Salton Europe Ltd

Salton Europe Ltd 

Heath Mill Road

Failsworth 

Wombourne

Manchester 

Wolverhampton

M35 0HS 

WV5 8AQ

Customer Service ([email protected])

telephone 0845 658 9700 (local rate number)

guarantee

Defects affecting product functionality appearing within one year of purchase will be 
corrected by replacement or repair provided the product is used and maintained in 
accordance with the instructions. Your statutory rights are not affected. 
Documentation, packaging, and product specifications may change without notice.

online

Hit 

www.russellhobbs.co.uk

 for more products.

43

9-

55

7

Содержание 14033









Отзывы: