PTX Universal PanTilt Head
Model 1
Quick Setup Guide
* in the PTX box *
IEC power cable. The power supply accepts AC110-240V
50/60Hz; Fuse T3 15A/250V; power consumption 60W.
Note: IEC cables are NOT included in International
shipments.
The following HD15 short breakout cables are included to
allow connectivity with most camera types:
1) LANC & 12VDC
(for Blackmagic
Micro Studio 4K)
2) RS 422/485
3) RS 232
4) LANC
5) Panasonic Remote (two wires)
6” BNC-BNC cable for use with Mini BNC adapter to take
SDI out from a standard BNC on a camera. (The two
internal SDI wires terminate with Mini BNC connectors at
the top of the head.)
2 x Mini BNC-to-BNC adapters for adapting internal cables
with Mini BNC connectors for use with cameras that use
standard BNC connectors for SDI OUT (and perhaps
GENLOCK IN).
Cable bundle clamp and screw (if used with Blackmagic
Micro Studio 4K camera).
