RUSH MH 1 Profile Plus User Manual
21
2. Use the DOWN and UP buttons to select DISPLAY WARNING and press
ENTER to confirm.
3. Use the DOWN and UP buttons to select YES (display) or NO (hide).
4. Press ENTER to confirm (or press MENU to exit without saving any
changes).
Fixture test
Automatic tests of all functions or manual test of individual functions can be
run from the control menus.
Auto test
To perform a complete test of all of the fixture functions:
1. Select FIXTURE TEST and press ENTER to confirm.
2. Use the DOWN and UP buttons to select AUTO TEST and press ENTER
to confirm. The automatic test will run.
3. Press MENU to exit.
Manual test
Fixture functions can be tested or controlled manually:
1. Select FIXTURE TEST and press ENTER to confirm.
2. Use the DOWN and UP buttons to select MANUAL TEST and press
ENTER to confirm.
3. Press MENU to exit.
Fixture information
Fixture operating hours counter
To see how many hours the fixture has been used:
1. Select FIXTURE INFORMATION and press ENTER to confirm.
2. Use the DOWN and UP buttons to select FIXTURE USE HOUR and press
ENTER to confirm. The number of hours will be shown.
Service countdown counter
This counter is resettable and can be used to monitor service intervals. The
counter is available under the FIXTURE INFORMATION
→
LIGHT USE HOUR
menu.
Firmware version
To see what software version is installed in the fixture:
1. Select FIXTURE INFORMATION and press ENTER to confirm.