Ruris RXM1000, Руководство пользователя

Страница: 80 / 86

EN
22
with oil. Make sure you have installed the knife with the face marked with the number
down when the machine is in the operating position.
⚫
Insert the knife adapter into the engine shaft.
⚫
Place the knife in the adapter. Make sure it is aligned and placed on the adapter.
⚫
Place the flat washer on the knife.
⚫
Replace the Hex HD screw
NOTE: To make sure the machine is working properly, the knife screw must be inspected
periodicallytightening).
Emergency stop handle : Lubricate the pivot
points of the stop handle at least once a season
with oil
Wheels: Lubricate the wheels at least once a
season with oil (engine oil). If the wheels are
removed for any reason, lubricate the surface of
the rear axle and the inner surface of the oil wheel
.
The first 5 hours change oil
Every 5 hours check oil level
clean the residues from use
check air filter
clean the exhaust pipe
Every 25 hours / 6 months change the oil
check the spark plug
Do not fill the oil bath above the limit. If you put above the maximum level the following
effects may occur :
1. Smoking
2. Heavy start ,
3. Spark plug anchorage ,
4. The oil can reach the air filter.
Fuel recommendations :
Use clean, fresh, unleaded gasoline.
Do not mix the oil with gasoline.
Check the fuel level.