Ruris DAC 110XL, Руководство пользователя

Страница: 89 / 172

EN
13
and pull gently until you feel resistance. Then pull constantly to start the engine. After the
engine has started, let it reach maximum speed, after which you can start working
START: For engines equipped with thermal chock
Pull the emergency stop handle with your left hand and stick it to the guide handle. Grasp
the starter handle with your right hand and pull gently until you feel resistance. Shoot
constantly to start the engine. After the engine has started, let it reach maximum speed,
after which you can start working.
START: For manual chock engines
Start by actuation (demaror): Pull the emergency stop handle
with your left hand and stick it to the guide handle and position
the chock lever in the closed position and apply the accelerator
lever to the maximum (if equipped). Grasp the starter handle with your right hand and pull
gently until you feel it is resisting, then constantly to start the engine, then position the
chock lever in the open position (working). After the engine has started, let it reach
maximum speed, after which you can use it in progress.
AUTOMATIC START (turnkey): If the machine is equipped and with automatic start, the
start will be done by actuating the key following the start-up steps depending on the
engine equipment.
8.2 STOP
2) Release the safety brake control lever (engine-stop).
Observation: Stop (for machines equipped with an acceleration lever, the shutdown will
be done after reducing the engine speed to a minimum, after which release the motor-
stop safety brake control handle).
8.3 OPERATION
Attention: Remove your hands and feet from the active area of the cutting
knife.