Ruris 601, Руководство пользователя

Страница: 40 / 62

EN
9
5. METHODS OF USE
Check if the animals are secured, the barn is ventilated and ventilated before
you start milker.
Clean the udder before milking.
The electrical installation must be grounded and you must use a fuse suitable
for engine power and grounding.
Make sure you have dry hands before plugging the power cord.
Do not move away from the machine during milker.
The surface must be in a straight plane to keep the machine stable during
milking.
In order not to lose the vacuum in the buckets, make sure that they have her
caps tightly closed.
Turn on the switch and pull the vacuum stopper from the milker claw (Figure-
1).
While milking cattles, the vacuum indicator must have a pressure of 0.40 bar
and the pulsator must begin the pulsing movement.
While milking sheep and goats the vacuum indicator must have a pressure of
0.35 bar. Adjust the vacuum indicator using the controller. (Figure- 2) (do not
exceed the pressure of 0.5 bar).
The pulsating compression cycle must be 55-60 pulsations for cattles, 90
pulsations for goats, 120 pulsations for sheep in one minute. (Description for
setting is in the MAINTENANCE section)
When the vacuum cleaner level reaches the optimal level and the pulsator
begins the pulsation, rotate down the milker arms in the position where the