Rural King RK24 Hydrostatic Скачать руководство пользователя

Страница: 14 / 143

1 - 7

GENERAL INFORMATION

5. ROPS (ROLL OvER PROTECTIvE STRUCTURES)

Tractors are equipped with a

frame for the protection of opera-

tors.
In the case of cab tractors the frame

is incorporated in the cab structure.
The objective of the frame or cab

structure is to protect the operator

in the event of a roll over and they

are designed to support the entire

weight of the tractor in that event.
Each

ROPS frame or cab struc-

ture is designed and has been test-

ed to meet industry and or Govern-

ment standards.
Included in these tests were all

mounting bases and bolts or other

fasteners.

As the ROPS frame or cab togeth-

er with the seat belt was designed to

meet certain standards, they must be

maintained in good order and condi-

tion.
To achieve this objective, both the

structure and the seat belt should be

inspected on a regular basis (every

time the tractor is serviced)
In the event that the seat belt is dam-

aged or frayed, it should be replaced

and in the event that the ROPS

frame or any part of the mounting

structure is damaged or cracked, the

faulty component must be replaced

with a new unit.
Such a unit must meet all of the test

criteria of the original unit.
Fitment of an inferior item or items

affects the certification of the entire

ROPS structure and the effective-

ness of the structure in the event of

an accident. Drilling or welding of the

ROPS structure is forbidden.

ROLL OvER PROTECTIvE STRUCTURES (ROPS)

►

USE OF THE TRACTOR WITH

THE ROPS LOWERED CAN

CAUSE FATAL INjURIES

►

On some models the ROPS frame

has a fold down feature, which can

be used to enter low buildings etc.
Take care when lowering the upper

section of the ROPS frame and take

extreme care while driving the tractor

with the ROPS frame lowered.
Do not wear the seat belt with

the ROPS lowered and please

remember that the fold down facility

is for special circumstances only and

must not be lowered for general use.

or ROPS frames to be effec-

tive and protect the operator,

the seat belt provided must

be worn in order to keep

operators within the ROPS

protected area in the event of

a roll over. Failure to use the

seat belt can still cause seri-

ous injury or death.

•

DANGER

RK24H-영문판-01.indd 7

2017-03-09 오후 5:43:45

Содержание RK24 Hydrostatic
















































































































































Результаты поиска

Содержание RK24 Hydrostatic

Отзывы:

Похожие инструкции для RK24 Hydrostatic

Бренды по названию

Популярные бренды

Rural King RK24 Hydrostatic, Руководство оператора

Результаты поиска

Содержание RK24 Hydrostatic

Отзывы:

Похожие инструкции для RK24 Hydrostatic

Бренды по названию

Популярные бренды