www.ruptela.com
[email protected] | +370 5 2045030
3
Open the
Connection
settings.
Configure
Fleet Management System
Main Server
settings (TrustTrack server settings are entered by
default).
Configure network provider
APN
settings.
Click
Save to device
to upload the configuration to the device.
Installation
For faster and easier installation, it is highly recommended to use
Install the device,
make sure the label is facing towards the sky and is not covered by metal.
Follow the recommendations:
•
It is allowed to tilt up to 45 degrees in any axis, but the top surface in all cases must be facing up
•
Install behind the dashboard
•
Install as close to the windshield as possible
•
Avoid installing near metal surfaces
•
Do not install the device near heat emitting or moving parts
Fasten the device in the vehicle using zip-ties or double-sided tape.
Make sure it is secured tightly.
Install the GNSS antenna facing towards the sky (if applicable)
Correct
Incorrect
