8
4.2.2
Manual Configuration
Follow these steps to configure the fatigue sensor:
1.
Tick the
Send I/O data with v1.1 protocol
checkbox (not applicable for the 5
th
gen
Advanced family devices).
2.
In the
Interfaces
section select the port, to which the fatigue sensor is connected (
PortA
or
PortB)
.
3.
Select
Fatigue sensor
from the drop-down list.
4.
Select an empty parameter slot.
5.
Enable the slot by ticking
Enable
.
6.
In the
ID
section select
Fatigue sensor alert
from the drop-down list.
7.
Set
Event on
to
Monitoring
or
Change
.
8.
Repeat steps 4-7 with the
Fatigue sensor snapshot on SD card
or/and
Last snapshot info
selections in the
ID
section.
