www.victorruoshui.co.kr
31
이 자료는 저작권법에 따라 보호받는 저작물이므로 무단배포 및 무단복제를 금하며, 내용의 전부
또는 일부를 이용하려면, 반드시 한국 VictorRuoshui 社 의 서면동의를 받아야 합니다.
and shock.
2. Do not store and use the instrument in high humility,
high temperature, combustible, explosive and strong
magnetic places.
3. Clean the surface of the instrument with the damp
cloth and gentle detergent, do not use the strong
solvent like the abrasive cleaner and alcohol, etc.
4. Take out the batteries if do not use the instrument for
a long time to prevent the batteries from leaking the
liquid to corrode the instrument.
5. When LCD displays “
“ symbol, should replace
the batteries as the following steps:
5-1. Loose the screw that fixes the batteries, and remove
the battery case.
5-2. Remove the spent 1.5V batteries, and replace them
by two same type new batteries. It is better to use
alkaline batteries for lengthening the usage time.
5-3. Fit on the battery case and tighten the screw.
5-4. The steps of replacing the fuse are same as the
above. When replacing the fuse, please use the
same specification, same type of fuse.
Note:
1. Do not input the voltage more than 1000V DC/AC
peak value.
2. Do not measure the voltage at the Current, Resistance,
Diode and Buzzer Range.
3. Do not use this instrument to measure before fixing