31
Reset of upper and lower limits to basic setting
In the setting mode select „HRM” point from the menu
„HR Zone“
„Reset“.
Setting of maximum cardiac frequency
In the setting mode select „HRM” point from the menu
„Max.HR” and adjust the specific maximum frequency.
Alarm activation for training zone
In the setting mode select „HRM” point from the menu
„HR Zone“
„Alert“
„On“.
When the cardiac frequency from the training is outside the maximum and
minimum limits set, a signal tone will be heard. The alarm for the training
zone only works in training mode.
Joint of chest strap with the GPS watch
Each chest strap has its own ID and it was paired from the factory with the
GPS watch, in order to avoid faults. If you replace the GPS watch or the belt,
these must be paired again.
In the setting mode select „HRM” point from the menu
select
„Pairing“.
Then touch, for a few seconds, the contact surfaces of the sensors.
If pairing was successfully performed, the notification "DONE!" appears.
If the notification "FAIL" appears, then the pairing did not work. Try
again, according to the description above.
