V2.2
RUNGU Electric Juggernaut User Manual
–
2017 model year
Copyright 2017 Standard Bearer Machines, LLC
21
How to Use Your New Rungu Trike
NOTE: All Electric Juggernauts are shipped at USA Street Legal Power Level (750 Watts). It is at the
discretion of the end user to program the bike to unlock maximum power.
How to Charge Your Battery
1.
Make sure your charger is the correct voltage for your country’s power requirement.
2.
Caution: USA buyers make sure the charger is in 110v operation mode by setting the
switch on the back of the charger
. European owners make sure to select 220v mode.
3.
Plug in the charger plug into the
circular connector on the front of
the Battery Case. The connector is
keyed, so there is only one way
that the plug will fit.
WARNING: ONLY USE THIS
RECEPTICLE TO CHARGE.
Even
though these are state of the art
batteries with built in Battery
Management System, safety is
always our number one priority. It
is always good to monitor these
batteries when charging and never
leave these fully charged for more than a couple days. Hi Power Cycles has never had a
problem with these batteries and wants to keep its safety track record. If you EVER notice
a battery puffing, stop charging the battery, place it outside on concrete a safe distance
away and monitor it closely from a safe distance to make sure all is O.K. Give us a
call/email us immediately if a battery begins to puff, and we will decide what the next
move should be. Do not attempt to use a battery after it has swelled and expanded or
“puffed” significantly. Make sure to only charge with “clean”
pure sine wave power.
4.
Turn the threaded cover to fasten
the connector to the Battery Case.
This protects the connector and
the charger cable from accidental
disconnects or damage to either
component during charging.
