Runco Reflection CL-610 CineWide, Руководство по эксплуатации для владельца

Страница: 29 / 56

29
Runco CL-610 Owner’s Operating Manual
Setting the Menu
INFO RVR
ENTER
EXIT MENU
• Press INFO to view information about the
active signal source and aspect ratio.
• Press MENU to open or close the on-screen
menu.
• Use the arrow buttons ( ▲,◄,▼,► ) to select
menu items or make adjustments.
• Press ENTER or ► to enter the setting of
items in the menu, or press EXIT to leave
and save the setting of items in the menu.
For more information
on settings, See “On-
Screen Display Menus”
on page 31.
Basic Operation
Selecting the Input
Source
PIP / PBP Function
VID S-VID COMP1
RGBHD HDMI
COMP2
PBP PIP PIP+ ACT
PIP-
• When you turn on the projector, it searches
for the input source you selected last
time.
• You may select the input source directly
on the remote control.
• For PIP (Picture In Picture) and PBP (Picture
By Picture) purposes, there are two groups
of inputs separated by their display modes:
Video group: Video, S-Video and
Component Y/C
B
/C
R
inputs.
Graphic (HD) group: HDMI and RGB/
Component HD inputs.
• PIP / PBP shows one input from the
Graphic group within or beside one input
from the Video group.
• Press PBP to enable the PBP function.
Press PBP again to switch the screens
left to right. Press PBP again to turn PBP
off.
• Press ACT (Active) to switch to the active
window. You can only change the input
signal settings in the active window.
• Press PIP to enable the PIP function.
Press PIP again to switch the main window.
Press PIP again to turn PIP off.
• Press PIP+ or PIP- to adjust the size of
the PIP window.
• Adjust the position of the PIP window with
the ARROW keys ( ▲,◄,▼,► ).