Runco QuantumColor CineWide with AutoScope Q-1500d, Руководство по установке и эксплуатации, Страница: 24 / 148

System Overview
8 Q-1500d Series Installation/Operation Manual
PRE
L
IMINAR
Y
2.1
Projector The standard Q-1500d projector, shown in Figure 2-2, consists of two discrete LED
optical engines stacked one on top of the other. The “primary” optical engine (the one
nearest the glass) receives an HDMI video signal from the Primary DHD Controller. The
“secondary” optical engine (the one nearest the feet) receives an HDMI video signal from
the Secondary DHD Controller. The projector superimposes the output from one engine
onto that from the other engine to produce an extremely bright and focused image.
Figure 2-2. S tandard Q-1500d Projector Functional Component s
• PROJECTION LEN S
Available in three versions:
• Standard throw range (1.94:1 to 2.40:1);
• Short throw range (1.64:1 to 1.86:1); and
• Long throw range (2.52:1 to 4.00:1; Q-1500d Ultra only).
• HORIZONTAL AND VERTICAL LEN S S HIFT CONTROL S
To access the lens shift controls, insert the included 5.0-mm Hex wrench into the
opening and turn it as needed to shift the lens in the desired direction (refer to
Adjusting the Focus, Zoom and Position of the Primary Lenses on page 54).
Len s
Loc k
Focu s
Ring
Zoom
Tab
Zoom
Tab
Projection
Len
s
Projection
Len
s
Len s
Loc k
Focu s
Ring
Hori z ontal Len s S hift
Control
Hori z ontal Len s S hift
Control
Exhau s t S ide
Inta k e S ide
Primary
Optical
Engine
Vertical Len s S hift
Control
Vertical Len s S hift
Control
S econdary
Optical
Engine