RUMBLE HOG RH7500, Руководство по эксплуатации

Страница: 64 / 164

64 64
Section 2 - Rumble Hog Systems
2.17 laser Guidance System
The optional laser guidance system uses an ultra
high visibility green laser to establish visual line
control for your truck. The system provides the
operator with another alignment tool that can be
used with the forward video camera monitor or
instead of the forward monitor, depending the
operator’s preference.
The operator adjusts the laser spot to the desired
reference point on the road surface using the
laser control panel in the cab. The laser spot is
impacted directly on the road surface and shows
the operator exactly where the vehicle is relative
to “on line.” The laser spot is on the road ahead of
the truck so that the reference is in the operator’s
driving field of view. The operator can also select
laser spot mode, steady on or blinking.
Switches in the laser control panel in the cab
control all laser functions. The following is a de-
scription of the functions performed by the laser
control panel.
1. System Power Switch - Energizes the laser
system. Note that the system requires sev-
eral minutes to warm up before the spot will
appear.
2. Laser Power Indicator Light - A red LED
that indicates the panel is energized when lit.
3. Laser Mode Light - A green LED that blinks
slowly when the panel is energized and is in
warm up mode. The light goes out when the
system is warmed up and the laser is ready
for activation.
4. Laser ON/OFF/MODE Switch - Turns the
laser on and selects the laser spot mode,
steady on or blinking.
5. Laser Spot Controls - Move the laser spot
UP/DOWN or RIGHT/LEFT.
WARNING
D I R E C T E X P O S U R E T O L A S E R L I G H T C A N C A U S E
PERMANENT EYE DAMAGE. NEVER LOOK DIRECTLY AT THE
LASER BEAM OR POINT THE LASER AT ANOTHER PERSON.
Laser Guidance Control Panel
Laser
Laser Control Panel Switches
3
1
4
5
2