7
PREcIsIon tooLs
GB
I english
to protect the user, motor and drill bit, the RsH 1300 is equipped with a mechanical, electrical and thermal overload protection.
Mechanical:
n case of sudden jamming of the drill bit, the drilling spindle is unclutched from the motor by means of a slip clutch.
Electrical:
In case of overload due to too large feed force, the electronic will cut oFF the machine. After discharge and switching on you can
continue drilling again.
thermal:
In case of permanent overload, a thermocouple protects the motor against destruction. In that case, the tool switches off
and can only be restarted after a certain cooling-down period (approx. 2 minutes). the cooling-down time depends on the
temperature of the motor winding and ambient temperature.
care and Maintenance
Environmental Protection
overload Protection
Before the beginning of the maintenance- or repair works you have to disconnect plug from the mains!
It is a must to unplug the tool before starting any service or repair works. Repairs may be executed only by appropriately qualified and experienced
personnel. After every repair, the unit has to be checked by an electrical specialist. According to its design, the tool requires a minimum of care and
maintenance. However, the following maintenance works and component checks have to be performed in regular intervals:
01. the electric tool as well as the ventilation slots always has to be clean.
02. During work, please pay attention that no foreign elements get into the interior of the machine.
03. In case of failure, a repair has to be carried out by an authorized service workshop.
04. once per quarter of a year, an electrical specialist should check the switch, cable and plug.
Raw material recycling instead of waste disposal
to avoid damages in transit, the tool is supplied in a sturdy packing. the packing as well as the tool and its accessories are made of recyclable
materials which enable environmentally friendly and sortwise disposal by the local reception points.
only for EU countries
Do not dispose of electric tools together with household waste material!
In observance of European Directive 2012/19/Ec on waste electrical and electronic equipment and its implementation in
accordance with national law, electric tools that have reached the end of their life must be collected separately and returned to an
environmentally compatible recycling facility.
