Rukka M-Clima, Руководство пользователя

Страница: 8 / 10

Users Manual
9
EN
6. Pairing and resetting the
device
When pairing, please perform the following
pairing procedure:
• Turn off the RUKKA
®
M-CLIMA
®
system.
• Locate the tiny hole at the
back of the blower unit,
to access the pairing/reset
button.
• Use a small, unfolded paper-clip or similar
to push the button (the button is inside a
tiny hole).
• Tap & hold the pairing/reset button for
3 seconds & release.
• Click on the remote control cooling button
to reinitiate the system.
• Do not apply excessive force or the
electronics may be damaged inside the
blower unit.
For restarting and resetting the device:
• Hold the pairing/reset button down for
10 seconds and release.
NOTE: The remote control could be
paired with up to 5 blower units.
4. Caring for the system
RUKKA
®
M-CLIMA
®
vest can be hand
washed in warm water using a mild
detergent and hang dried. To wash this
product, firstly disconnect all cables from
blower unit, remove the blower unit, extract
the manifold from the vest side. Ensure
the battery and all system components are
removed from the garment. To clean all the
components wipe with a dry cloth.
In case you are not using some of the cable
plug holes on the blower unit, use the cover
caps provided to cover them to prevent dust
or water ingress.
5. Charging the battery
Remove the battery from the vest, connect
it to the charger and plug the charger into
any standard electrical outlet. Charging is
complete once the LED on the charger goes
from red to green to OFF (3-4 h).
Battery storage
Store the battery/remote control in a cool,
dry area. Avoid extended exposure to
direct sunlight. Charge the battery every
6 months to the amount specified by the
manufacturer, even if the battery is not
used.