Note: The figure is only for reference, and the specific object prevails.
Mounting on the Workbench
In actual application, the standard 19-inch cabinet may be unavailable. In this case, the router is often mounted on a clean
workbench. The operation is easy and the requirements are as follows:
The workbench is stable and is properly grounded.
The supplied plastic cushion is stuck to the small hole at the bottom of the router and a space of 10 cm is set aside
around the router for dissipation.
No weight is placed on the top of the router.
Mounting on the Wall
The RSR10-20E series router can be mounted on the concrete wall or wooden wall. The operation is as follows:
Drill two holes on the wall. The space between the holes should be 144 mm.
Insert the anchors into the holes, and fasten the anchors with screws.
Align the two mounting holes on the bottom of the device over the screws. Mount the device on the wall.
Installing the Power Cable and the Grounding Cable
Ruijie RSR10-02E series routers support the following AC power supply:
