·
Hardware Installation and Reference Guide Product Overview
1 Product Overview
Ruijie RG-AP130(W2) Wall AP is designed for wireless deployment in hotels, offices, residential buildings and settings
alike. The wall-mountable AP integrates Ethernet and VoIP ports. Featuring a concise design and easy deployment, the
AP enables zero disruption to the interior finishes and offers the best solution for scenarios with delicate interior design.
The dual-radio, dual-band AP supports concurrent operation of 802.11a/n/ac and 802.11b/g/n, delivering data rates of up
to 300Mbps in 802.11n and 866Mbps in 802.11ac. The Wall AP provides four 10/100/1000Base-T LAN ports and one
10/100/1000Base-T WAN port, delivering optimal wireless network coverage and cost protection with additional wired
network interfaces and VoIP ports.
RG-AP130(W2) supports security, radio frequency (RF) control, mobile access, Quality of Service (QoS) and seamless
roaming. Teaming up with Ruijie RG-WS Wireless Controller Series, wireless data forwarding, high performance security
and access control can be accomplished with ease.
1.1 Technical Specifications
Table 1-1 Technical Specifications of RG-AP130(W2)
Hardware Specifications
Radio
2.4G: 2 x 2MIMO
5G: 2 x 2MIMO
Transmission
Protocol
2.4G : 802.11b/g/n
5G : 802.11a/n/ac wave2
Operating Bands
802.11b/g/n: 2.4 GHz to 2.4835 GHz
802.11a/n/ac: 5G: 5.15 GHz to 5.35 GHz, 5.47 GHz to 5.725 GHz, 5.725 GHz to 5.85GHz
(Country-specific)
Antenna
Built-in low-radiation omnidirectional antenna (Base gain 3dBi)
Spatial Streams
2 streams
Max Throughput
802.11b/g/n
: up to 300Mbps
802.11a/n/ac
: up to 867Mbps
Up to 1.167Gbps per AP
Modulation
OFDM: BPSK@6/9Mbps, QPSK@12/18Mbps, 16-QAM@24Mbps, 64-QAM@48/54Mbps
DSSS: DBPSK@1Mbps, DQPSK@2Mbps, and [email protected]/11Mbps
MIMO-OFDM: BPSK, QPSK, 16QAM , 64QAM and 256QAM
Receive Sensitivity
11b/g: -94dBm(1Mbps), -74dBm(54Mbps)
11a: -90dBm(6Mbps), -74dBm( 54Mbps)
11nHT20: -72dBm@MCS7, -68dBm@MCS15
11ac HT20: -90dBm( MCS0) , -65dBm( MCS8)
11ac HT40: -85dBm( MCS0) , -60dBm( MCS9)
11ac HT80: -82dBm( MCS0) , -58dBm( MCS9)
Max Transmit Power
≤
100mw (20dBm, RF card transmit power only)
(Depending on the country of use, laws and regulations.)
Transmit
Power
1 dBm
