·
Hardware Installation and Reference Guide
System Debugging
4
System Debugging
4.1
Setting up a Debugging Environment
Use PoE to power the AP.
PoE power supply
To use a PoE device, make sure the peer end supports the IEEE 802.3af or 802.3at PoE standard. Then, connect the
Ethernet cable to the WAN on the AP.
4.1.1
Powering Up the AP
4.1.1.1
Pre power-up check
Ensure that the cable is properly connected.
Verify that the input voltage matches the specifications of the AP.
4.1.1.2
Post power-up check
After powering up, it is recommended that you check the following items to ensure normal operation of the AP.
The LED works properly.