18
Configuration Guide
eWeb Configuration
When
VLAN Settings
is set to
on
, the page is shown in the figure below:
The
VLAN Settings
page is divided into two parts:
The upper part enables port VLAN configuration. You can select a port, set the VLAN type (
Access
or
Trunk
; when
Trunk
is
selected,
Permit VLAN
can be configured),
Permit VLAN
, and
Native VLAN
, and click
Save
to save the port VLAN
configuration.
The lower part lists the port and VLAN settings.
Note: Packets from ports in the native VLAN are untagged.
