Ruijie Networks RG-AP3220 Series, Руководство по установке и справочное руководство по оборудованию

Страница: 19 / 29

2) If the AP is installed on the wall, hold the AP in your hands and push it upward and away from the bracket in the LAN
port direction.
Figure 3-11 Removing the Wall-Mount AP
3) If the AP is installed on the ceiling, hold the AP in your hands and push it sideward and away from the bracket in the
LAN port direction.
Figure 3-12 Removing the Ceiling-Mount AP
Connecting Cables
Connect UTP/STP to the LAN/PoE port on the AP. See Appendix A for supported wiring of twisted pairs.
By default, baud rate is set to 9600, data bit 8, parity none, stop bits 1 and flow control none on the console
port of the AP. The console port is used only when you want to configure the AP manually.
Avoid bending the cable to a small radius close to the connector.