25
25
CMS: Indicates a Clear CMOS button which is used to restore CMOS settings to factory
defaults.
Preparation before Installation
Installation Environment
The RG-Rain400 must be used indoors. The installation environment needs to meet the
following requirements to ensure proper running of the device:
Maintain a 10 cm clearance on each side and around the rear cover of the RG-Rain400
to ensure proper ventilation and heat dissipation. After cables are connected to the
device, the cables should be bound and placed on the cable management bracket, so
as not to block the air intake vent.
The temperature and humidity inside the computer room need to be maintained within
the proper ranges. The device will be damaged if it works in an adverse environment in
the long run. The ambient temperature and humidity requirements of the RG-Rain400
are as follows:
-
Long-term operating temperature: 0°C to 40°C (32°F to 104°F)
-
Short-term operating temperature: -10°C to 50°C (14°F to 122°F)
-
Long-term operating humidity: 10% to 90%
-
Short-term operating humidity: 5% to 95% (Short-term operation refers that the
device continuously works for no more than 48 hours, totaling no more than 15
days every year.)
