RuggedCom RuggedSwitch RSG2200, Руководство по установке

Страница: 26 / 33

26

2008 RuggedCom Inc. All rights reserved Rev105
5 Technical Specifications
5.1 Power Supply Specifications
Input Range Power Supply Type
Min Max
Fuse
Rating
Max. Power
Consumption 3
12 – 24 VDC 10 VDC 36 VDC 6.3A(F) 2
24 VDC 18 VDC 36 VDC 5A(F) 2
48 VDC 36 VDC 59 VDC 2A(T) 2
HI (125/250 VDC) 1
HI (110/230 VAC) 1
88 VDC
85 VAC 300 VDC
265 VAC
2A(T)
1,2
22W
NOTES:
1. This is the same power supply for both AC and DC.
2. (F) Denotes fast-acting fuse, (T) denotes time-delay fuse
3. Power consumption varies based on configuration. 10/100Base-TX ports consume roughly
1W less than fiber optic ports
4. For continued protection against risk of fire, replace only with same type and rating of fuse.
5.2 Failsafe Relay Specifications
Parameter Value (Resistive Load)
Max Switching Voltage 240VAC, 125VDC
Rated Switching Current 2A @ 240VAC
0.15A @ 125VDC, 2A @ 30VDC
Max Switching Capacity 150W, 500VA
5.3 Networking Standards Supported
Parameter
10Mbps
Ports
100Mbps
Ports
1000Mbps
Ports
Notes
IEEE 802.3 10BaseT / 10BaseFL
IEEE 802.3u 100BaseTX / 100BaseFX
IEEE 802.3z 1000BaseSX/LX
IEEE 802.3ab 1000BaseTx
IEEE 802.3x Full Duplex Operation
IEEE 802.1D MAC Bridges
IEEE 802.1Q VLAN (Virtual LAN)
IEEE 802.1p Priority Levels