Rugged Ridge 60 in. RGB Lighted Whip w/ Controller (07-17 Wrangler JK) Installation Guide
Installation Time: 1-2 Hours
Tools Required:
Socket Wrench
13mm Socket
7/8” Wrench or Socket
A few wire connectors
Installation Instructions:
1.
Remove spare tire
2.
Install CB Antenna mount by removing the two 13mm hex bolts on the top right of the spare tire mount, and
installing the CB antenna mount using the hex bolts, lock washers, and flat washers that are given. (Seen in the
photo in step 3)
3.
Unscrew the lighted whip from the whip mounting cylinder. Place this in one of the holes of the CB antenna
mount