Driver PTT used by driver for transmitting over 2-way radio.
VOX control adjusts voice activation sensitivity.
LED green indicates power is on, red indicates transmitting.
VOL / Power controls intercom volume and power.
Passenger PTT used by passenger for transmitting over 2-way radio.
BLUETOOTH pairing mode active when intercom is powered on.
The Remote plugs into the “Remote” port
on the back of the intercom.
+
-
<<
>>
Raises the volume of paired device
Lowers volume
Skips back one track
Skips forward one track
Play/Pause music, answer/end call
1.
2.
3.
4.
5.
6.
1.
2.
3.
4.
5.
6.
Power On / Off the intercom by rotating the volume control clockwise / counterclockwise.
Music / Audio input via bluetooth connection.
1
2
3
5
4
6
RUGGED RRP665 INTERCOM
User Guide
RUGGEDRADIOS.COM
RUGGED RRP665 INTERCOM - USER GUIDE V.2020
INTERCOM
REMOTE MUSIC CONTROL (OPTIONAL)
INTERCOM OPERATION
Wearing helmets or headsets, rotate the VOX control fully clockwise. This should activate the microphone, allowing you to hear yourself
speak as well as other passengers wearing helmets/headsets. Slowly rotate the VOX control counterclockwise until the microphone turns off.
This setting will have to be adjusted to compensate for background noise. When the VOX is adjusted properly, the microphone should only
be on when speaking. This adjustment also controls music dimming.
The higher the background noise level (engine, wind, etc.), the further counterclockwise you will need to adjust the VOX control.
Be sure to have all helmet / headset microphones positioned so they are touching the lips. This ensures proper micro- phone activation and
promotes noise canceling.
•
•
VOX operation will dim music volume when speaking through the intercom or during radio transmit/receive.
If the music is always quiet, adjust the VOX control on the intercom until the mic turns off and music volume increases.
Only driver can speak on cell phone call.
•
•
•
PTT buttons only activate one microphone (ie: Driver PTT activates Driver microphone). If receiving radios do not hear your voice but hear a
"click" indicating your radio is transmitting, verify that your PTT and headset cables are in the correct ports.
When transmitting the LED on both the intercom and radio will illuminate red.
•
•
VOX ADJUSTMENT
Received audio is controlled by your radio’s volume control, not the intercom volume control. Push-To-Talk (PTT) Buttons are only used for
transmitting over a 2-way radio connected to your intercom. To transmit, press and hold the PTT button, speak, and release when finished.
2-WAY RADIO USE
Start with the intercom powered off and the bluetooth function of your phone or device powered off.
Turn on the intercom.
Turn on the phone or device’s bluetooth.
Wait for “RUGGED 665” to be displayed on the device.
Select “RUGGED 665” and wait for the device to pair to the intercom.
If pairing is not successful, restart the process.
BLUETOOTH PAIRING FOR MUSIC AND CELL
